Panamax M4315-PRO Bluebolt 9-Outlet 15 Amp Power Management with Control and Energy Monitoring
BlueBOLT remote power and energy management provides real-time, cloud-based control and monitoring of the energy used by electronic devices. From easy reboots of locked-up electronics to comprehensive energy tracking and scheduled conservation, BlueBOLT provides a unique combination of control and...
BlueBOLT remote power and energy management provides real-time, cloud-based control and monitoring of the energy used by electronic devices. From easy reboots of locked-up electronics to comprehensive energy tracking and scheduled conservation, BlueBOLT provides a unique combination of control and monitoring directly at the electronics' power source.;;The 15A 9-Outlet M4315-PRO Power Management with Control & Energy Monitoring from Panamax has one front panel outlet & eight independent outlets that are controllable/programmable via the web with the RS-232 card (included but not installed) or the included CV-1 BlueBOLT card in back. ;;Linear filtration is provided with three isolated LiFT filter banks plus one isolated filter bank for high current devices. Automatic Voltage Monitoring (AVM), Protect or Disconnect circuitry and sequential startup/shutdown provide superior protection to whatever is connected to the device. Two buttons on the front panel are for programmable rebooting. Provides LAN, telco, cable/satellite/antenna TV signal side protection. The M4315-PRO voltage sense trigger input uses a standard 3.5mm mini-mono plug. This feature provides an on/off trigger for the M4315-PRO using a direct current (DC) voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the M4315-PRO's switched outlets. When the source component is turned off, the voltage trigger signal is also turned off, and the M4315-PRO's shutdown sequence is initiated. An AC adapter of the appropriate voltage (5-24 V DC) plugged into a switched outlet may also be used if a DC trigger is not built in.;;The sleek design includes volt/amp meter, outlet status and warning LEDs. Includes removable rack ears. Dim: 1.75"H x 17"W x 12.25"D. 3-year limited warranty and $5 million lifetime limited connected equipment policy.
- Enter your model number
- above to make sure this fits.
- Web-based Remote Power Management To Monitor & Control Outlets Using Included Cv-1 Bluebolt(r) Card
- Linear Filtration With 3 Isolated Lift Filter Banks Plus 1 Isolated Filter Bank For High Current Devices
- Automatic Voltage Monitoring(tm) (avm)
- Protect Or Disconnect(tm) Circuitry
- Sequential Startup/shutdown
Panamax MR4000 MR4000 8-Outlet Home Theater Power Management with Surge Protection and Power Conditioning