Kicker CompRT 43CWRT672 CompRT shallow-mount 6-3/4" Subwoofer


  • $ 109.95

Kicker CompRT 43CWRT672 CompRT shallow-mount 6-3/4" Subwoofer 


If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup trucks, and ATVs in mind. The low-profile 43CWRT672 6-3/4” subwoofer performs just like a full-size sub, but without killing all your cargo space. This high-performance CompRT sub stands less than 3" tall, so your installation options are wide open.



Product Highlights:


  • - 6-3/4" subwoofer with dual 2-ohm voice coils
  • - injection-molded polypropylene cone
  • - rubber surround
  • - power handling: 150 watts RMS
  • - peak power handling: 300 watts
  • - frequency response: 30-500 Hz
  • - sensitivity: 82.6 dB
  • - top-mount depth: 2-3/4"
  • - sealed box volume: .18 - .75 cu. ft.
  • - grille not included
  • - warranty: 1 year





Dual Voice Coils: This woofer features dual 2Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1Ω load. When the voice coils are wired in series, the woofer presents a 4Ω load.


Shallow-Mount: Kicker's CompRT series is designed to minimize depth, giving you subwoofer options where standard enclosures don't fit. The vent-less, solid-pole design allows the woofer to be mounted directly against the rear wall of a sealed enclosure.


All-Weather: Although not marine certified, Kicker describes the CompRT series as weatherproof.


Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.18 ft³ to 0.75 ft³.



Built With Boom In Mind


The 43CWRT672 comes equipped with a rigid injection-molded polypropylene cone that won't flex and cause distortion while you're cranking the bass. Its rubber surround will last through years of heavy use, combining with a special-design back and top plate to give you more excursion (which equals more bass) than other skinny subs.   



Made To Work With Many Systems


This sub handles up to 150 watts RMS so make sure you've got a solid amp to power it. You can wire the dual voice coils for either 4- or 1-ohm total impedance, giving you more wiring options when setting up your system. This sub sounds great in a sealed enclosure.