Infinity KAPPA-20MX 2" Car Audio Dome Midrange w/Bandpass Crossover
Infinity Kappa 20mx Kappa Series 2" Midrange Speakers
Expand your Infinity Kappa Series component system with this pair of Kappa 20mx 2" midrange speakers. The Kappa glass fiber cone will hold its shape when the power's cranked up, giving you a robust midrange presence. Glass fiber weighs less than traditional materials, so you don't need a ton of power to drive these speakers, but oversized voice coils certainly help them handle up to 65 watts RMS.
Infinity's Plus One+ woofer technology extends the cone right up to the edge of the basket, giving you more surface area than with most comparable speakers. The extended cone also allows this speaker to cover effectively down to 550 Hz.
- - 2" Plus One+ glass fiber midrange speakers
- - 2.5-ohm impedance
- - handles up to 65 watts RMS (195 watts peak power)
- - frequency response: 550-7,000 Hz
- - sensitivity: 90 dB at 2.83 volts
- - top-mount depth: 1-1/8"
- - warranty: 3 years
These midrange speakers are designed to work with the Kappa 60csx and Kappa 90csx component systems which include crossovers that can be switched to 3-way mode. Infinity also includes bandpass crossovers for excellent tonal balance when incorporating these into any 3-way system.
What's In The Box:
- - 2 Midrange drivers
- - 2 Grilles
- - 2 Grille frames
- - 2 Mounting brackets
- - 2 Crossovers
- - Two 20" Crossover input wires
- - Four 1-1/2" Allen head screws
- - 3mm Allen head bit
- - Eight 1" Screws
- - Eight M3x4mm Machine screws
- - 4 Speed clips
- - 2 Adhesive backed Infinity logo badges
- - 2 Adhesive backed foam gaskets
- - Template on box
- - Installation manual
Midrange Upgrade: These midrange drivers are designed for use with the Kappa 60csx or 90csx 2-way component sets (both sold separately). The crossovers included with the component sets can be set to 3-way, and they integrate with the crossovers included with the midrange.
Crossovers: Each crossover has screw terminal outputs that will accept bare wire or spade connectors up to 0.315" wide. The included wire connects the midrange crossover inputs to identical plugs on the crossovers included with the Kappa 60csx or 90csx component sets.
- choosing a selection results in a full page refresh