Denon PMA800NE Stereo Integrated Amplifier - Black

  • $ 599.00
  • Save $ 50.99


Denon PMA-800NE Hi-Res Integrated Amplifier

Stereo integrated amplifier with built-in DAC and phono preamplifier

 

The Denon PMA-800NE integrated amplifier sets New heights in premium audio performance with digital inputs and a built-in phono equalizer. From Deep bass to detailed highs, listen to your favorite high-resolution audio content with the 192kHz/24bit D/a converter. At 85W (4 ohms) per channel, the PMA-800NE supplies enough power to drive your speakers for Optimal sound. Connect the PMA-800NE to your favorite components with the three optical and one coaxial digital inputs. Powered by the Denon advanced high current (a HC) single push-pull circuit power amplifier, the PMA-800NE provides exceptional sound quality that balances high power with delicate, musical Details.

The Denon PMA-800NE integrated amplifier provides high-current power for your speakers — up to 85 watts at 4 ohms — and plenty of connections for your favorite digital and analog sources. Inside the solid vibration-resistant chassis are carefully selected circuits and components, including a 24-bit/192kHz digital-to-analog converter that makes your CDs and streaming files sound excellent.

 

  • - 50 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.07% THD
  • - 85 watts x 2 channels into 4 ohms (20-20,000 Hz)
  • - 4-ohm capability allows use with a wide range of speakers
  • - 24-bit/192kHz digital-to-analog converter for high-performance playback of digitally connected sources such as network music players or CD players
  • - built-in phono preamp supports input from both moving coil and moving magnet cartridges
  • - Analog Mode disables digital circuitry for better sound with analog sources
  • - Advanced High Current (AHC) single push-pull circuit power amplifier
  • - Stop Mode deactivates the microprocessor when it's not in use
  • - front-panel tone controls (treble and bass)
  • - front-panel A/B switching for two pairs of speakers
  • - built-in headphone amplifier with full-size (1/4-inch) jack
  • - remote control included
  • - signal-to-noise ratio: 105 dB (line in), 86 dB (moving magnet), 71 dB (moving coil)

 

Connections:

  • - 3 optical and 1 coaxial digital audio inputs
  • - stereo RCA phono input
  • - 4 stereo RCA line-level inputs
  • - stereo RCA audio outputs for recording
  • - 2 pairs of binding post speaker connectors

 

Dimensions and Warranty:

  • - 17-1/8"W x 4-13/16"H x 12-1/8"D
  • - weight: 16.5 lbs.
  • - warranty: 1 year

 

 

High Power 85W Integrated Amplifier

Power your loudspeakers with the Denon PMA-800NE integrated amplifier. Engineered with remarkable Denon amplifier technology, the PMA-800NE delivers 85 watts of power-per-channel into 4 ohms. This integrated amplifier offers compatibility with the widest range of speaker types and impedances for operational stability.

 

Advanced High Current (AHC) Single-Push-Pull Circuit

Enjoy powerful sound with detailed, musical accuracy. The PMA-800NE incorporates AHC transistors with two-to-three times the electrical current supply capacity of conventional audio power transistors.

 

High-Grade Audio Components

Denon engineers carefully constructed the amplifier circuit within the PMA-800NE to secure a frequency response of up to 100 kHz during applied use. The volume circuit suppresses noise in the amplifier, achieving high sonic resolution. The PMA-800NE handles a wide, dynamic range of high-resolution audio sources with tone control and power throughout.

 

Build Integrity with Thoughtfully Selected Components

With more than a 100-year legacy of designing premium audio components, trust that your Denon product has undergone rigorous testing. The overall aesthetic, sound quality and design integrity of PMA-800NE and its Hi-Fi components are built to last.

 

Analog Mode

Analog Mode allows the PMA-800NE to operate as a purely analog amp, disabling coaxial, digital, and optical digital inputs while you listen to an analog source. Turn on Analog Mode to close power to the dedicated digital power source and stop operation of the digital input circuity, avoiding any high frequency influence on the analog section of the PMA-800NE. Enjoy your favorite analog sources with uninhibited clarity and detailed reproduction.

 

MM and MC Phono Equalizer

The PMA-800NE includes a phono equalizer that supports input from both MM and MC cartridges. This phono equalizer has high gain, and unlike loops in other circuit board patterns which cause adverse effects on sound quality, the simple, straightforward design of the PMA-800NE phono equalizer significantly improves sound.

 

Direct Mechanical Ground Construction for Pristine Sound

Vibration-resistant design reduces the adverse audio effects of heavy components within amplifiers so sound quality meets Denon standards. The power transformer — which is the largest vibration source among amplifier components — is outfitted with a 1.6mm thick steel plate to the mount, suppressing vibration created by the transformer as well as external vibration toward the transformer. By directly supporting the transformer with a steel plate, the vibration surrounding the chassis is reduced resulting in pristine sound.

 

Optical and Coaxial Digital Inputs

The PMA-800NE features three Optical inputs and one Coaxial input and supports PCM signals up to 192 kHz/24 bit. These digital inputs help to improve sound and visual quality of your TV audio, Blu-Ray, media players, and more. Also use it to input high-resolution sound from an audio source on your computer.

 

Main Transformer with Individual Wiring

To eliminate interference and maintain exceptional sound quality, the main power transformer of the PMA-800NE has separate coiled wires for the audio and control circuits. An integrated micro-processor features Stop Mode for even greater sound quality while you listen.

 

Micro-Processor Stop Mode

The micro-processor of the PMA-800NE features a Stop Mode that automatically ceases all operations of the micro-processor when it’s not needed for playback. By stopping the oscillation of the micro-processor clock during these listening moments, the audio signal is protected from external noise and enhances sound quality.

 

Signal Level Divided Construction (S.L.D.C.)

The Signal Level Divided Construction (SLDC) chassis developed by Denon is used in the audio circuit to ensure that delicate musical signals are faithfully amplified and transmitted to the speakers. Listen with exemplary quality, every time.

 

100+ Years of Firsts in Audio Technology

Founded in 1910, Denon has a deep heritage of “firsts” in audio technology — from Japan’s first audio electronics manufacturer, to producing the world’s first commercial CDs. This focused investment in audio R&D ensures you get the latest technology and highest quality with every listening experience.


People who bought this product, also bought